Electric fireplace stove – If you miss the chimneys of his childhood home and want to install one in your home, you may have found the cost of installing a wood-burning electric fireplace stove prohibitive. An electric fireplace can be a good alternative. Create an opening in the wall of the electric fireplace stove that meets the manufacturers recommended dimensions. Click least 8 inches “service cable” you will use to connect to the junction box of the fireplace as an electric fireplace is wired.
Use wire strippers to the outer covering of the cable, and then remove half an inch of coating the ends of each individual cable. Loosen the screws on the cover of the junction box, and remove the cover. Put the screws in a safe place. Remove all knockouts or use the cable clamp in the junction box. Set the electric fireplace stove opening, and maneuver to its final location. Set a level on top of the electric fireplace and fit if necessary. Make sure the frame with nailing flanges.
12 Photos Gallery of: Electric Fireplace Stove Ideas
Connect the cables to the junction box according to the wiring diagram provided with the electric fireplace stove. Place all connectors inside, and screw the cover back on the junction box. The clamp in the junction box should contain only the outer jacket of service cable and the thermostat. If you have the line of a wall switch, then it will be in the bracket also when an electric fireplace stove is wired.